Categories
The Working Principle of Tungsten Carbide Sleeve
tungsten carbide sleeve has wear resistance, good finish, do not need to be often replaced, so as to achieve higher utilization rate of equipment and personnel, and is widely used
Apr 8th,2020
544 Views
Tungsten carbide sleeve is mainly used for stamping and stretching, is a kind of parts to protect the equipment, according to different requirements, the product will be different. The use of tungsten carbide sleeve can effectively reduce the wear between punch or bearing and equipment, and achieve a guiding role. In the stamping die, tungsten carbide sleeve has wear resistance, good finish, do not need to be often replaced, so as to achieve higher utilization rate of equipment and personnel, and is widely used; In the drawing, mainly some copper, stainless steel parts of the drawing, because of the use of frequency is too high, easy to heat, wear sleeve, so that the punch pin run, the size of the product error, and the appearance of the product bad. It is recommended that the customer should try to choose the tungsten carbide sleeve to avoid the above defects. Zhuzhou Max Precision Carbide Company can provide high quality tungsten carbide sleeve, inner hole and outer circle surface finish are mirror, high dimensional precision, good verticality, enjoy high evaluation in customers.
The working principle of tungsten carbide sleeve as following:
1. Tungsten carbide sleeve is the use of its contact surface to wear bushing, protection and its contact surface, wear to a certain degree after the replacement. What tungsten carbide axle sleeve USES is wear-resisting material, the surface that its contacts is frictional, axle sleeve is a kind of soft material commonly, have certain avoid and wear when frictional, axle sleeve USES reduce wear material, reduce the wear of shaft and hole, it is sliding bearing. The tungsten carbide sleeve can be replaced for many times to extend the service life of the body.
2. Tungsten carbide sleeve is widely used and has high flexibility. Generally speaking, the tungsten carbide sleeve is a kind of component to protect the equipment. It plays a role in the practical work and its application environment and purpose have a lot to do. In valve applications, the tungsten carbide sleeve is fitted with a stem in the bonnet to reduce valve leakage and seal; In the bearing application field, the use of the tungsten carbide sleeve can reduce the wear between the bearing and the shaft seat, and avoid the increase of the clearance between the shaft and the hole.
3. Tungsten carbide sleeve production and processing of high-strength, can withstand prolonged load, with high chemical stability, alkali, alcohol, ether, hydrocarbons, acid, oil, detergent, water (sea water), and has no smell , non-toxic, tasteless, non-rust characteristics, its widely used in alkali corrosion, environmental health, food, textile and other aspects of mechanical components provides excellent conditions for use.
Our company can also provide tungsten carbide sleeve according to your drawings, warmly welcome to inquiry and order sales@maxcarbide.com.
